Category: Homepage > Macap

View topic - Tamping on a scale - Coffee Forum

View topic - Tamping on a scale - Coffee Forum ()

  „I'm dot too sure if the scale would be designed for the pressure. However i have a recomendation: Use a MACAP auto tamper. GOTO:“

http://www.coffeeforums.com/ viewtopic.php?t=818&view=next - Cached

See Technorati for links to this site, see Alexa for related sites and search this website for ›Macap‹.

Some slightly related:

Specialty Coffee Bulletin Board :: View topic - swift grinder Specialty Coffee Bulletin Board :: View topic - swift grinder

  „I'm curious to know if anyone here has experimented with the auto tampers available such as the Macap. Might they represent a good compromise between the Swift and traditional hand tamping?“

http://www.scaa.org/.../ viewtopic.php?t=730&sid=6c348bb2627780be92d9440b99d0ebe4 - Cached

Specialty Coffee Bulletin Board :: View topic - Introduction and yes... I'll be asking plenty of questions! Specialty Coffee Bulletin Board :: View topic - Introduction and yes... I'll be asking plenty of questions!

  „I like the concept of the Macap Auto tamper but oddly enough it is not available with a 58mm base - only 53mm and 57mm. have you guys experimented with any auto tampers?“

http://www.scaa.org/.../ viewtopic.php?p=4911&sid=6c348bb2627780be92d9440b99d0ebe4 - Cached

It's All About Coffee It's All About Coffee

  „3 TAMPING Creating great espresso requires compacting the coffee grounds into the portafilter handle, a process called tamping. (Most machines come with a round, flat tamper with a short handle.) The proper technique: Apply about 30 pounds of pressure, then finish with a twist to polish the top of the grounds. Not sure how hard to push? Practice by pushing down on a bathroom scale with one hand.“

http://www.aboutcoffee.net/ 2004_05_09_bcearc.html - Cached

CoffeeGeek - Macap Automatic Tamper CoffeeGeek - Macap Automatic Tamper

  „Accessories & Misc : Macap Automatic Tamper“

http://www.coffeegeek.com/reviews/accessories/ autotamper - Cached

Solis Espresso Equipment and Solis Maestro Mill: SL-90 Crema, Solis Master 5000 Superauto, Solis MaestroSolis 177 Mill and Solis166 Mill Solis Espresso Equipment and Solis Maestro Mill: SL-90 Crema, Solis Master 5000 Superauto, Solis MaestroSolis 177 Mill and Solis166 Mill

  „The built-in 53mm tamper in the body of the SL-90 is all the tamping you need to make perfect espresso shots! The portafilter design reduces the significance of exact tamping and the Solis prefers a lighter tamp to the standard 35-40 lb pressure needed to tamp on other machines --but fear not, you still have much autonomous control over the shot (or an opportunity to mess it up!) with the fineness of the grind!“

http://www.sweetmarias.com/ prod.solis-espresso.shtml - Cached


Archived in Macap